💀 Twisted Punisher™ AOD Conversion Package

650 HP Street / Strip Installation Package

Ford AOD • 1980–1993 • Up to 650 HP

Rated Up To 650 HP at the Crank

Built for high-output, boosted, nitrous and street/strip small-block Ford applications.

Includes the Twisted Punisher™ AOD transmission, C6-spline non-lockup performance torque converter and AOD conversion accessories.

🔧 INTERNAL BUILD SPECIFICATION

⚙️ Sonnax Smart-Tech® Forward Drum & Clutch

• Sonnax Smart-Tech® 76655-01K High-Capacity Forward Drum

• One-Piece Forged Forward Drum

• 6-Friction High-Energy Forward Clutch Pack

• AODE-Style Forward Frictions & Steels

• AODE-Style Wave Plate

• AODE-Style Backing Plate

• AODE-Style Retaining Ring

• Forward Clutch Clearance Set & Verified

• Forward Clutch Air Checked

The factory cast AOD forward drum is replaced with the Sonnax one-piece forged Smart-Tech® drum. The Sonnax drum increases forward clutch capacity by 20% and eliminates the weak cast snap-ring groove found in the original AOD drum.

🔩 AODE Sun Shell & Reverse / OD Drum

• AODE-Style Sun Gear Shell

• AODE-Style Reverse / Overdrive Drum

• 2" Wide Performance Overdrive Band

• Reverse Clutches & Steels Replaced

• Reverse Clutch Clearance Set & Verified

• Overdrive Band Clearance Set & Verified

The AODE-style sun shell and reverse/OD drum are used with the Sonnax forward drum conversion and allow the 2" wide overdrive band to be installed.

⚙️ Direct Clutch

• High-Energy Direct Clutches

• Kolene® Direct Clutch Steels

• Increased Direct Clutch Capacity

• Direct Drum Inspected

• Direct Drum Splines Inspected

• Direct Clutch Clearance Set & Verified

• Direct Clutch Air Checked

🔩 Mechanical Diode & Intermediate Clutch

• Mechanical Diode Intermediate One-Way Clutch

• Spiral Intermediate Retaining Ring

• New Intermediate Clutches & Steels

• Intermediate Clutch Clearance Set & Verified

• Intermediate Clutch Air Checked

The mechanical diode replaces the factory roller-style intermediate one-way clutch.

The spiral retaining ring replaces the factory-style intermediate retaining ring for improved retention at higher RPM.

🔧 Overdrive Apply System

• Sonnax Super Hold Overdrive Servo — 76890-17KP

• Sonnax O-Ringed Servo Pin

• 2" Wide Performance Overdrive Band

• Servo Bore Inspected

• Servo Pin Bore Inspected

• Overdrive Band Clearance Set & Verified

The Sonnax Super Hold servo increases overdrive-band apply area. The O-ringed servo pin reduces oil leakage at the servo pin-to-case bore.

🔩 300M ONE-PIECE SHAFT — NON-LOCKUP

• 300M One-Piece AOD Input Shaft

• Factory AOD Direct-Drive Shaft Arrangement Eliminated

• Non-Lockup Converter Configuration

• Input Splines Inspected

• Output Shaft Inspected

The one-piece 300M shaft replaces the factory AOD concentric direct-drive shaft arrangement.

This configuration does not retain factory AOD direct drive and uses a non-lockup performance torque converter.

⚙️ AOD GEARTRAIN

Standard AOD Gearset — INCLUDED

• Standard-Ratio AOD Planetary Gearset

• Planetary Pinions & Pins Inspected

• Ring Gears Inspected

• Sun Gears Inspected

Standard AOD Ratios:

• 1st — 2.40:1

• 2nd — 1.47:1

• 3rd — 1.00:1

• Overdrive — 0.67:1

🔥 OPTIONAL 4R70W WIDE-RATIO GEARSET

• 2.84:1 First

• 1.55:1 Second

• 1.00:1 Third

• 0.70:1 Overdrive

Available as an optional upgrade for applications requiring additional 1st- and 2nd-gear multiplication.

🔧 Pump

• Pump Completely Disassembled & Cleaned

• New Pump Gears

• Pump Body & Pocket Inspected

• Pump Gear Clearance Checked

• New Pump Bushing

• Pressure Regulator Valve & Bore Inspected

• Performance Pressure Regulator Calibration

• Boost Valve & Sleeve Inspected

• Lubrication Passages Inspected

• Converter Charge Circuit Inspected

• Line Pressure Checked & Set

🔧 Valve Body & Governor

• Valve Body Completely Disassembled & Cleaned

• TransGo AOD-HP Performance Reprogramming Kit

• Performance Boost Valve Calibration

• Governor Calibrated for Punisher Shift Points

• Governor Valves Checked for Free Movement

• Separator Plate Inspected

• Throttle Valve / TV Circuit Inspected & Set

• Valve Body Bores Inspected for Wear

• Hydraulic Cross-Leaks Checked

• Punisher Street / Strip Shift Calibration

Valve Body Upgrades Available

• Silverfox SPT-R Performance Valve Body

• Silverfox Full Manual — Forward Pattern

• Silverfox Full Manual — Reverse Pattern

🔩 Bushings, Bearings, Seals & Gaskets

• New Pump Bushing

• New Case & Drum Bushings

• Torrington Bearings Replaced as Required

• Thrust Bearings & Washers Replaced as Required

• New Pump Seal

• New Extension Housing Seal

• New Clutch Piston Seals

• New Servo Seals

• New Sealing Rings

• New Valve Body & Case Gaskets

• New Filter

• Endplay Set & Verified

🔩 NON-LOCKUP PERFORMANCE TORQUE CONVERTER — INCLUDED

• C6-Spline Non-Lockup Performance Torque Converter

• 2100–2500 RPM Target Stall

• Stall Matched to Engine & Application

• Furnace-Brazed

• Performance Bearings

• Balanced & Pressure Tested

Higher Stall Options Available

• 10" Performance Converter

• Higher Stall Street / Strip Applications

• Custom Stall Available Based on Engine, Camshaft, Rear Gear, Tire Size & Vehicle Weight

📦 PUNISHER AOD CONVERSION ACCESSORIES — INCLUDED

• Throttle Valve (TV) Cable System

• TV Cable Bracket & Return Spring

• Carburetor or EFI Throttle Linkage Adapter

• Spacer Plate

• Transmission Dipstick & Tube

• Torque Converter Hardware

• Flexplate — Engine Year & Balance Required

• Neutral Safety / Reverse Light Switch

• Output Yoke

• Transmission Mount

Proper TV cable geometry and adjustment are required with the standard automatic valve body.

Conversion parts are selected based on vehicle, engine, year and existing transmission.

🚗 ENGINE APPLICATIONS

• Ford 289

• Ford 302 / 5.0L

• Ford 351W / 5.8L

Common applications include Mustang, Fox Body, classic Ford, hot rod and high-output small-block Ford conversions, including C4-to-AOD applications.

📌 INTENDED USE

✔ Up To 650 HP

✔ High-Output Small-Block Ford Engines

✔ Boosted Applications

✔ Nitrous Applications

✔ Street / Strip

✔ Aggressive Street Performance

✔ Higher-RPM Applications

✔ Performance AOD Conversions

Not intended for heavy towing.

💀 WHAT PUNISHER ADDS OVER TWISTED PRO™

• Sonnax Smart-Tech® 76655-01K Forged High-Capacity Forward Drum

• 6-Friction High-Energy Forward Clutch Pack

• AODE-Style Forward Clutch Stack

• AODE-Style Sun Gear Shell

• AODE-Style Reverse / OD Drum

• 2" Wide Performance Overdrive Band

• Mechanical Diode Intermediate One-Way Clutch

• Sonnax Super Hold Overdrive Servo

• 300M One-Piece AOD Input Shaft

• Non-Lockup Converter Configuration

• C6-Spline 2100–2500 RPM Performance Converter

• Optional 4R70W Wide-Ratio Gearset

• Punisher Valve Body & Governor Calibration

Twisted Punisher™ — 650 HP AOD conversion package built with a 300M one-piece shaft, forged forward drum, mechanical diode, non-lockup converter and complete installation package.