
AOD Level 2 Conversion Package with 2100–2400 Stall Converter | Ford AOD Performance Upgrade
Ford AOD • 1980–1993 • Up to 550 HP
Rated Up To 550 HP / 500+ Ft-Lbs at the Crank
Built for modified small-block Ford street and street/strip applications.
Includes the Twisted Pro™ AOD transmission, 2100–2400 RPM performance torque converter and AOD conversion accessories.
• Twisted Torque™ High-Energy Clutches & Steels
• 5-Friction High-Energy Direct Clutch Pack
• Increased Forward Clutch Capacity
• Kolene® Steels in High-Load Clutch Packs
• Performance Overdrive Band
• High-Apply Overdrive Servo
• Upgraded Reverse Clutch Pack
• Clutch Clearances Set & Verified
• Band Clearance Set & Verified
• Clutch Packs Air Checked
• New Intermediate Roller Clutch
• Spiral Intermediate Retaining Ring
• Intermediate Clutch Clearance Set & Verified
• Hardened AOD Input Shaft
• Forward Drum Inspected
• Direct Drum Inspected
• Reverse / Overdrive Drum Inspected
• Planetary Gearsets Inspected
• Sun Gears Inspected
• New Bushings
• Torrington Bearings Replaced as Required
• Thrust Washers Replaced as Required
• Endplay Set & Verified
• New Pump Seal
• New Extension Housing Seal
• New Clutch Piston Seals
• New Sealing Rings
• New Valve Body Gaskets
• New Case Gaskets
• New Filter
• Pump Disassembled & Inspected
• New Pump Gears
• Pump Gear Clearance Checked
• Pump Pocket Clearance Checked
• New Pump Bushing
• Pressure Regulator Valve & Bore Inspected
• Boost Valve & Sleeve Inspected
• Lubrication Passages Inspected
• Line Pressure Checked & Set
• Valve Body Disassembled & Cleaned
• TransGo AOD-HP Performance Reprogramming Kit
• Performance Boost Valve Calibration
• Governor Calibrated for Pro Shift Points
• Separator Plate Inspected
• Throttle Valve / TV Circuit Inspected & Set
• Valve Body Bores Inspected for Wear
• Hydraulic Cross-Leaks Checked
• Pro Street / Strip Shift Calibration
• 12" AOD Performance Torque Converter
• 2100–2400 RPM Stall
• Stall Matched to Engine & Application
• Factory AOD Direct-Drive Operation Retained
• Furnace-Brazed
• Balanced & Pressure Tested
• Throttle Valve (TV) Cable System
• TV Cable Bracket & Return Spring
• Carburetor or EFI Throttle Linkage Adapter
• Spacer Plate
• Transmission Dipstick & Tube
• Torque Converter Hardware
• Flexplate — Engine Year & Balance Required
• Neutral Safety / Reverse Light Switch
• Output Yoke
• Transmission Mount
Proper TV cable geometry and adjustment are required on every AOD installation.
Conversion parts are selected based on vehicle, engine, year and existing transmission.
• Ford 289
• Ford 302 / 5.0L
• Ford 351W / 5.8L
Common applications include Mustang, Fox Body, classic Ford cars, F-Series, Bronco and C4-to-AOD performance conversions.
✔ Up To 550 HP / 500+ Ft-Lbs
✔ Modified Small-Block Ford Engines
✔ Naturally Aspirated Performance Builds
✔ Mild to Moderate Camshaft Combinations
✔ Street / Strip Driving
✔ Higher-RPM Street Applications
✔ C4-to-AOD Performance Conversions
Not intended for heavy towing.
For applications above 550 HP, forced induction or aggressive drag use, see the Twisted Punisher™ AOD.
• 5-Friction High-Energy Direct Clutch Pack
• Increased Forward Clutch Capacity
• Kolene® Steels in High-Load Clutch Packs
• Performance Overdrive Band
• High-Apply Overdrive Servo
• Spiral Intermediate Retaining Ring
• Hardened AOD Input Shaft
• New Pump Gears
• TransGo AOD-HP Performance Reprogramming Kit
• Performance Boost Valve Calibration
• Performance Governor Calibration
• 2100–2400 RPM Performance Torque Converter
• Furnace-Brazed Converter