🔥 48RE Dodge Diesel Extreme Performance Transmission — Twisted Executioner™

Up to 850 HP Rated • Extreme Duty • Competition / Heavy Load Use

2003–2007 Dodge Ram 2500 / 3500 • 5.9L Cummins

When torque becomes violent, the build must become uncompromising.

The Twisted Executioner™ 48RE is engineered for Cummins trucks operating at the edge of the 48RE platform — high-horsepower street/strip trucks, competition pulls, and extreme towing applications where standard performance builds fail.

This is not a street rebuild.

This is not a mild performance upgrade.

This is a full-force Twisted Torque™ execution-level transmission.

⚙️ WHAT SETS TWISTED EXECUTIONER™ APART

✔ Rated for up to 850 horsepower

✔ Designed for extreme torque loads and elevated line pressure

✔ Built for competition use, aggressive street/strip, and severe-duty towing

✔ All features of Punisher™, PLUS:

✔ Full billet rotating and apply system

✔ Maximum-pressure hydraulic calibration

✔ Reinforced valve body and band apply architecture

✔ Multi-disc billet torque converter included

Pump & valve body Modified & Updated the Twisted Torque™ Way

No reused friction

No compromise components

No generic internals

🔧 INTERNAL PERFORMANCE COMPONENTS — EXECUTIONER™ SPEC

⚙️ Twisted™ Extreme-Duty Clutch System

• Highest-energy friction system available for the 48RE platform
• Configured for maximum torque holding at elevated pressure
• Optimized clutch clearances for aggressive apply
• Designed to survive extreme heat and load cycles

⚙️ Billet Pistons & Apply Components

• Billet forward piston
• Billet direct piston
• Reinforced apply circuits to eliminate piston flex
• Consistent clutch apply under extreme pressure

⚙️ Billet Rotating Assembly

• Billet forward drum
• Billet input shaft (23-spline)
• Billet output shaft
• Eliminates OEM flex and failure points at high torque

🧠 HYDRAULICS & SHIFT CONTROL — MAXIMUM AUTHORITY

🔧 Twisted™ Maximum-Pressure Valve Body

• Custom calibrated, high-pressure valve body
• Reinforced accumulator and servo apply system
• Billet accumulator piston
• Billet intermediate servo
• Billet band lever, strut, and anchor
• Designed for extreme line pressure and instantaneous apply
• Fully tested and verified before installation

✔ Instant clutch apply

✔ No overlap

✔ No slip under load

🔧 TransGo® Competition Shift Kit — Installed & Tuned

• TransGo® performance shift kit (or comparable competition-grade hydraulic upgrade)
• Maximum line rise and pressure stability
• Eliminates shift delay and clutch overlap
• Tuned specifically for 850 HP torque loads

🔩 PUMP, BEARINGS & STRUCTURAL SUPPORT

⚙️ Twisted™ Reinforced Pump Assembly

• Fully blueprinted pump
• Pressure-stabilized for extreme torque
• Upgraded pump bushing
• Designed to maintain pressure at high RPM and load
• Modified & Updated the Twisted Torque™ Way

⚙️ Complete Heavy-Duty Thrust & Bearing System

• New thrust washers
• Full Torrington thrust bearing upgrade
• Optimized oil control under extreme load

⚡ ELECTRONICS & CONTROL UPGRADES

• New overdrive solenoid
• New lockup solenoid
• Upgraded governor solenoid
• Designed to maintain accurate pressure control under extreme conditions

🔄 TORQUE CONVERTER — INCLUDED

⚙️ HD Billet Multi-Disc Torque Converter

• Billet cover
• Multi-disc lockup clutch
• Designed for extreme torque and competition use
• Minimal slip, maximum lockup strength
• Matched specifically to Executioner™ hydraulic calibration

✔ Built to survive abuse

✔ Designed for high-boost, high-load environments

🛠️ BUILD PROCESS — EXECUTIONER™ STANDARD

✔ Fully disassembled

✔ Cleaned and inspected by hand

✔ Blueprinted clearances set during assembly

✔ Hydraulic pressure tested

✔ Final inspection before shipment

📦 WHAT’S INCLUDED

✔ Twisted Executioner™ 48RE Extreme Performance Transmission

✔ HD Billet Multi-Disc Torque Converter w/ Billet Cover — INCLUDED

✔ TransGo® Competition Shift Kit — Installed

✔ Full Billet Rotating & Apply Assembly

✔ Maximum-Pressure Valve Body Calibration

✔ Reinforced Pump & Bearing System

⚠️ Transfer case not included

⚠️ Competition-level build — professional installation recommended

🚛 IDEAL FOR

✔ High-horsepower Cummins builds

✔ Competition trucks

✔ Street/strip applications

✔ Extreme-duty towing

✔ Customers who have exceeded the limits of Punisher™

🏁 THE BOTTOM LINE

The Twisted Executioner™ 48RE is built for one purpose:

To survive where everything else fails.

If you’re pushing the absolute limits of the 48RE platform, this is the transmission that finishes the job.

No mercy. No excuses. Executed the Twisted™ way.